Dhcp Server For Mac

  



The DHCP Server runs instantly without any installation as a service or application. See running the DHCP Server. All older versions of the DHCP Server are free software and can be used and redistributed for both academic and commercial purposes at absolutely no cost. There are no royalties or GNU-like “copyleft” restrictions.

  1. Sub-menu: /ip dhcp-server lease DHCP server lease submenu is used to monitor and manage server's leases. The issued leases are showed here as dynamic entries. You can also add static leases to issue a specific IP address to a particular client (identified by MAC address).
  2. Aug 16, 2020 KB01474 - How to turn your computer (Mac OS) into a DHCP server to give your Atlona unit an IP address August 16, 2020 18:54 Atlona Inc. Provides this 3rd party script and settings “as is” and “as available” for your use, without warranty of any kind, either express or implied, including all implied warranties of merchantability,.
-->

Gets one or more lease records from the DHCP server service.

Syntax

Description

The Get-DhcpServerv4Lease cmdlet gets one or more lease records from the Dynamic Host Configuration Protocol (DHCP) server service.

If you specify the ScopeId parameter, the active leases from the specified scope are returned.To get all kinds of leases including Active, Offered, Declined, and Expired, the AllLeases parameter must be specified.

If you specify the IPAddress parameter, the lease records for the specified IP address are returned.

If you specify the ClientId and ScopeId parameters, the leases for the specified ClientId parameter values in the specified scope are returned.

If you specify the BadLeases and ScopeId parameters, all of the bad lease records for the specified scope are returned.

If you specify the BadLeases parameter without the ScopeId parameter, all of the bad lease records from the DHCP server service are returned.

Examples

Example 1: Get all active leases in a scope

This example gets all the active IPv4 address leases from the DHCPv4 scope 10.10.10.0.

Example 2: Get leases for specified addresses

This example gets the IP address lease information for the IPv4 addresses 10.10.10.10 and 10.20.20.20.

Example 3: Get declined leases

This example gets all the bad, or declined, IPv4 address leases from the DHCPv4 scope 10.10.10.0.

Example 4: Get leases for specified clients

This example gets the IPv4 address leases from the DHCPv4 scope 10.10.10.0 for the clients identified by the client IDs F0-DE-F1-7A-00-5E and 00-24-D7-C5-25-B0.

Example 5: Get all leases in a scope

This example gets all of the types of IPv4 address leases including Active, Declined, and Expired from the DHCPv4 scope 10.10.10.0.

Example 6: Get active leases from all scopes on a computer

This example gets all of the active IP address leases from all of the scopes on the DHCP server service that runs on the computer named dhcpserver.contoso.com.The Get-DhcpServerv4Scope cmdlet returns the scope objects and pipes the objects into this cmdlet which returns the active address lease objects from all the scopes.

Dhcp server for mac os

Parameters

Indicates that this cmdlet returns all of the IPv4 address leases regardless of address state.By default, this cmdlet returns only active leases.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False

Runs the cmdlet as a background job.Use this parameter to run commands that take a long time to complete.The cmdlet immediately returns an object that represents the job and then displays the command prompt.You can continue to work in the session while the job completes.To manage the job, use the *-Job cmdlets.To get the job results, use the Receive-Job cmdlet.For more information about Windows PowerShell® background jobs, see about_Jobs.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False

Indicates that this cmdlet returns only bad leases.If an IP address lease is declined by the client because of a conflict with another client, the lease record is marked as bad, or declined, by the DHCP server service.

An IP address lease in this state is not offered to any client until expiry of a timer, which is 10 minutes.

Type:SwitchParameter
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False

Runs the cmdlet in a remote session or on a remote computer.Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet.The default is the current session on the local computer.

Type:CimSession[]
Aliases:Session
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False

Specifies the client identifier (ID) for which the IP address lease record is to be retrieved.

Type:String[]
Position:2
Default value:None
Accept pipeline input:True
Accept wildcard characters:False

Specifies the DNS name, or IPv4 or IPv6 address, of the target computer that runs the DHCP server service.

Type:String
Aliases:Cn
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False

Specifies the IP address for which the lease record is retrieved.

Type:IPAddress[]
Position:Named
Default value:None
Accept pipeline input:True
Accept wildcard characters:False

Specifies the scope ID, in IPv4 address format from which the IPv4 address leases are retrieved.

Query Dhcp Server For Mac Address

Type:IPAddress
Position:1
Default value:None
Accept pipeline input:True
Accept wildcard characters:False

Specifies the maximum number of concurrent operations that can be established to run the cmdlet.If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer.The throttle limit applies only to the current cmdlet, not to the session or to the computer.

Type:Int32
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False

Inputs

The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.

Dhcp Server For Mac High Sierra

Server

Outputs

Dhcp Server For Mac Os

CimInstance[]

Dhcp server for mac catalina

The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.

Related Links